|
|
 |
 | 
|
   |
 |
Experience the Life
: Tools
: Saws
Complex tools
Of all hand tools used by 18th-century woodworkers, saws were among the most technically complex to manufacture. To work well, saw blades had to maintain a delicate balance of hardness so that they would stay sharp, stiffness so that they could be pushed through the work, flexibility so that they would bend and not break under stress, and smoothness of surface so that they would not bind in the cut.
Saws date back 5,000 years
Saws have been used to cut wood for more than 5,000 years. In the 18th century, they were made in a variety of shapes and sizes designed for different jobs. Woodworkers used large saws to cut wood into planks, boards, and veneers. Smaller saws were used to cut boards into parts, to cut joints, and to make decorative piercings.
Ripsaws and handsaws were used for general-purpose cutting of
boards. Ripsaws were designed to cut with the grain, along the
length of boards. Handsaws were slightly smaller and were used
to cut both along and across the grain.
|
Cross-cut and pit saws were large, two-man versions of handsaws
and ripsaws. Logs were cut to length with cross-cut saws and
into boards with pit saws.
|
Compass saws had narrow, pointed blades that allowed them to be
started through small drilled holes. They were used to saw holes
in the middle of boards and pierced work such as chair splats.
|
Backsaws had thin metal blades designed for making fine cuts.
A thick iron or brass strip fitted over the back of the blade
stiffened the saw and gave these tools their name.
|
| Framed saws had their blades mounted inside wooden
frames. The frames stretched the blade tight and allowed the use of longer,
thinner blades. The bow saw (left) was used by cabinetmakers
and joiners to make curved cuts. The felloe saw (right) was used
by wheelwrights for cutting the curved
wooden segments of wheels and by chairmakers for sawing curved chair arms
and legs. |
|
| |
|
Historic Triangle